How Do I Enable Parent Paths via Plesk Control Panel? October 19, 2007
Posted by Alex in PLESK Control Panel.add a comment
Yeah…
My ASP script requires the ability to find parent folders using ../ (Parents Paths). But they are not working on my domain, how do I enable them?
Solution:
- Click on the domain on which you want to enable parent paths.
- Under the “Hosting” section click on the “Web Directories ” icon.
3. Click the “Preferences” icon on the “General” tab.
4. Under “Application Settings” tick the “Enable parent paths” checkbox.
5. Click OK.
OSI Model October 4, 2007
Posted by Alex in Networks.add a comment
At the beginning of this post read the history of OSI model. Also ask your self: What is OSI Model?
The Open Systems Interconnection Basic Reference Model (OSI Reference Model or OSI Model for short) is a layered, abstract description for communications and computer network protocol design, developed as part of the Open Systems Interconnection (OSI) initiative. It is also called the OSI seven layer model. The layers, described below, are, from top to bottom, Application, Presentation, Session, Transport, Network, Data Link, and Physical. A layer is a collection of related functions that provides services to the layer above it and receives service from the layer below it. For example, a layer that provides error-free communications across a network provides the path needed by applications above it, while it calls the next lower layer to send and receive packets that make up the contents of the path.
Even though newer IETF and IEEE protocols, and indeed OSI protocol work subsequent to the publication of the original architectural standards that have largely superseded it, the OSI model is an excellent place to begin the study of network architecture. Not understanding that the pure seven-layer model is more historic than current, many beginners make the mistake of trying to fit every protocol they study into one of the seven basic layers. This is not always easy to do as many of the protocols in use on the Internet today were designed as part of the TCP/IP model, and may not fit cleanly into the OSI model.
In 1977, work on a layered model of network architecture, which was to become the OSI model, started in the American National Standards Institute (ANSI) working group on Distributed Systems (DISY)[1]. With the DISY work and worldwide input, the International Organization for Standardization (ISO), began to develop its OSI networking suite[2]. According to (Bachman), the term “OSI” came into use on 12 October 1979. OSI has two major components: an abstract model of networking (the Basic Reference Model, or seven-layer model), and a set of concrete protocols. The standard documents that describe OSI are for sale and not currently available online.
Parts of OSI have influenced Internet protocol development, but none more than the abstract model itself, documented in ISO 7498 and its various addenda. In this model, a networking system is divided into layers. Within each layer, one or more entities implement its functionality. Each entity interacts directly only with the layer immediately beneath it, and provides facilities for use by the layer above it.
In particular, Internet protocols are deliberately not as rigorously architected as the OSI model, but a common version of the TCP/IP model splits it into four layers. The Internet Application Layer includes the OSI Application Layer, Presentation Layer, and most of the Session Layer. Its End-to-End Layer includes the graceful close function of the OSI Session Layer as well as the Transport Layer. Its Internetwork Layer is equivalent to the OSI Network Layer, while its Interface layer includes the OSI Data Link and Physical Layers. These comparisons are based on the original seven-layer protocol model as defined in ISO 7498, rather than refinements in such things as the Internal Organization of the Network Layer document.
Protocols enable an entity in one host to interact with a corresponding entity at the same layer in a remote host. Service definitions abstractly describe the functionality provided to a (N)-layer by an (N-1) layer, where N is one of the seven layers inside the local host.
You remember, the best way to memorize these 7 layers is, memorize a sentence:
All People Seem To Need Data Process .
ODBC Connection DNS In Plesk October 2, 2007
Posted by Alex in PLESK Control Panel.add a comment
Hi,
Sometimes may you forced about using ACCESS databases in PLESK.For make a new ODBC connection between ACCESS databases or other else DBs and *.asp files on server uses PLESK you should modify the connection like these notes:
- Login to PLESK control panel.
- Search your exact domain.(For Admins)
- In your domain configuration, choose ODBC setting.
- Click on “Add New ODBC DSN”.
- Your Connection name is optional. So make it now.
- Explain your description on Connection Description field.
- Choose your Driver type (Microsoft Access Driver *.mdb)
- Let’s go on OK!
- Now in [DBQ] Database File Path write this path which is in some servers: E:\Inetpub\vhosts\YOURDOMAIN.TLD\httpdocs\Your DB Folder \Yourdb.mdb
- If your database has a USERNAME and PASSWORD, write it on fields.
- Please hit the Test button to check your connection.It will be connected.
- Enjoy it.
10 tips for improving your wireless network October 1, 2007
Posted by Alex in Wireless.add a comment
Hi, This is my first post. I quote here an article about wireless networks from Microsoft:
Extend the range and the strength of your wireless network
If Windows ever notifies you about a weak signal, it probably means your connection isn’t as fast or as reliable as it could be. Worse, you might lose your connection entirely in some parts of your home. If you’re looking to improve the signal for your wireless network, try some of these tips for extending your wireless range and improving your wireless network performance.
- Position your wireless router (or wireless access point) in a central location.
When possible, place your wireless router in a central location in your home. If your wireless router is against an outside wall of your home, the signal will be weak on the other side of your home. Don’t worry if you can’t move your wireless router, because there are many other ways to improve your connection.
-
Move the router off the floor and away from walls and metal objects (such as metal file cabinets).
Metal, walls, and floors will interfere with your router’s wireless signals. The closer your router is to these obstructions, the more severe the interference, and the weaker your connection will be.
- Replace your router’s antenna.
The antennas supplied with your router are designed to be omni-directional, meaning they broadcast in all directions around the router. If your router is near an outside wall, half of the wireless signals will be sent outside your home, and much of your router’s power will be wasted. Most routers don’t allow you to increase the power output, but you can make better use of the power. Upgrade to a hi-gain antenna that focuses the wireless signals only one direction. You can aim the signal in the direction you need it most.
-
Replace your computer’s wireless network adapter.
Wireless network signals must be sent both to and from your computer. Sometimes, your router can broadcast strongly enough to reach your computer, but your computer can’t send signals back to your router. To improve this, replace your laptop’s PC card-based wireless network adapter with a USB network adapter that uses an external antenna. In particular, consider the Hawking Hi-Gain Wireless USB network adapter, which adds an external, hi-gain antenna to your computer and can significantly improve your range.
Laptops with built-in wireless typically have excellent antennas and don’t need to have their network adapters upgraded.
- Add a wireless repeater.
Wireless repeaters extend your wireless network range without requiring you to add any wiring. Just place the wireless repeater halfway between your wireless access point and your computer, and you’ll get an instant boost to your wireless signal strength. Check out the wireless repeaters from ViewSonic, D-Link, Linksys, and Buffalo Technology.
-
Change your wireless channel.
Wireless routers can broadcast on several different channels, similar to the way radio stations use different channels. In the United States and Canada, these channels are 1, 6, and 11. Just like you’ll sometimes hear interference on one radio station while another is perfectly clear, sometimes one wireless channel is clearer than others. Try changing your wireless router’s channel through your router’s configuration page to see if your signal strength improves. You don’t need to change your computer’s configuration, because it’ll automatically detect the new channel.
- Reduce wireless interference.If you have cordless phones or other wireless electronics in your home, your computer might not be able to “hear” your router over the noise from the other wireless devices. To quiet the noise, avoid wireless electronics that use the 2.4GHz frequency. Instead, look for cordless phones that use the 5.8GHz or 900MHz frequencies.
- Update your firmware or your network adapter driver.Router manufacturers regularly make free improvements to their routers. Sometimes, these improvements increase performance. To get the latest firmware updates for your router, visit your router manufacturer’s Web site.Similarly, network adapter vendors occasionally update the software that Windows XP uses to communicate with your network adapter, known as the driver. These updates typically improve performance and reliability. To get the updates, visit Microsoft Update, and then under Select by Type click Hardware, Optional. Install any updates relating to your wireless network adapter. It wouldn’t hurt to install any other updates while you’re visiting Microsoft Update, too.Note When you go to Microsoft Update, you have two options: the Express Install for critical and security updates and Custom Install for high priority and optional updates. You may find more driver updates when you use Custom Install.
- Pick equipment from a single vendor.While a Linksys router will work with a D-Link network adapter, you often get better performance if you pick a router and network adapter from the same vendor. Some vendors offer a performance boost of up to twice the performance when you choose their hardware: Linksys has the SpeedBooster technology, and D-Link has the 108G enhancement.
- Upgrade 802.11b devices to 802.11g.802.11b is the most common type of wireless network, but 802.11g is about five times faster. 802.11g is backward-compatible with 802.11b, so you can still use any 802.11b equipment that you have. If you’re using 802.11b and you’re unhappy with the performance, consider replacing your router and network adapters with 802.11g-compatible equipment. If you’re buying new equipment, definitely choose 802.11g.Wireless networks never reach the theoretical bandwidth limits. 802.11b networks typically get 2-5Mbps. 802.11g is usually in the 13-23Mbps range. Belkin’s Pre-N equipment has been measured at 37-42Mbps.
